| ２０１１年論文リスト： 材料物性研究部 (*)：First Author's |
| 1 | Transport Characterization of GdBa2Cu3O7-delta Coated Conductors Deposited by the In-Plume PLD Reel-to-Reel Technique *R.Fuger, N.Chikumoto, T.Izumi, T.Kiss, S.Lee, IEEE T APPL SUPERCON 21(2011) 3154-3158 |
| 2 | Microstructural characterization of GdBa2Cu3Oy superconductive layer fabricated by in-plume pulsed laser deposition *T.Kato, N.Chikumoto, T.Hirayama, T.Izumi, S.Lee, Y.Shiohara, K.Tanabe, R.Yoshida, PHYSICA C 471 (2011) 1012-1016 |
| 3 | The interaction of nanostripes and the twin structure in light-rare-earth-element-based 123-type high-T-c superconductors *MR.Koblischka, NH.Babu, U.Hartmann, A.Koblischka-Veneva, M.Muralidhar, T.Wolf, PHYSICA C 471 (2011) 66-70 |
| 4 | Delamination behavior of Gd123 coated conductor fabricated by PLD *N.Sakai, N.Chikumoto, T.Izumi, S.Lee, K.Tanabe, PHYSICA C 471 (2011) 1075-1079 |
| 5 | Investigation of Three-Dimensional Current Distribution at Silver Diffusion Joint of RE-123 Coated Conductors Based on Magnetic Microscopy Combined With Finite Element Method *K.Higashikawa, N.Chikumoto, Y.Honda, M.Inoue, T.Izumi, T.Kiss, H.Okamoto, N.Sakai, IEEE T APPL SUPERCON 21 (2011) 3403-3407 |
| 6 | バルク超電導体を用いた小型無冷媒磁石のNMR応用―NMR信号を用いたバルク磁石の評価― *仲村高志,伊藤佳孝,吉川雅章,坂井直道,成木伸也,平林泉,内海博明, 低温工学 46-No3 (2011) 139-148 |
| 7 | 小型無冷媒NMR用環状配向バルク超電導体の開発 *坂井直道, 成木紳也, 手嶋英一, 森田充, 平林泉, 仲村高志, 伊藤佳孝, 吉川雅章, 内海博明, 低温工学 46-No3 (2011) 131-138 |
２０１１年論文リスト： 線材研究開発部 (*)：First Author's |
| 1 | Scanning Hall-probe microscopy system for two-dimensional imaging of critical current density in RE-123 coated conductors *K.Higashikawa, Y.Iijima, K.Imamura, M.Inoue, T.Izumi, K.Kakimoto, T.Kawaguchi, T.Kiss, T.Saitoh, K.Shiohara, PHYSICA C 471 (2011) 1036-1040 |
| 2 | Possibility of Nd:YAG-PLD Method for Fabricating REBCO Coated Conductors *Y.Ichino, T.Izumi, I.Ono, Y.Shiohara, Y.Takai, Y.Yoshida, T.Yoshimura, M.Yoshizumi, IEEE T APPL SUPERCON 21 (2011) 2949-2952 |
| 3 | Improvement of IBAD-MgO texturing for high throughput of buffered substrate *T.Ito, T.Izumi, R.Kuriki, K.Matsuse, Y.Takahashi, M.Tokumari, M.Yoshizumi, PHYSICA C 471 (2011) 963-965 |
| 4 | Field Angle Dependence of Critical Current Density in YGdBCO Coated Conductor *M.Kiuchi, T.Izumi, T.Kato, T.Koida, T.Matsishita, J.Minami, M.Miura, ES.Otabe, Y.Shiohara, Y.Takahashi, IEEE T APPL SUPERCON 21 (2011) 3210-3213 |
| 5 | Joint properties of REBCO coated conductors *T.Maebatake, Y.Ichinose, M.Inoue, T.Izumi, K.Kaneko, T.Kiss, N.Mori, M.Mukaida, S.Munetoh, R.Teranishi, K.Yamada, M.Yoshizumi, PHYSICA C 471 (2011) 987-989 |
| 6 | Mixed pinning landscape in nanoparticle-introduced YGdBa2Cu3Oy films grown by metal organic deposition *M.Miura, SA.Baily, L/Civale, N.Haberkorn, T.Izumi, B.Maiorov, K.Marken, Y.Shiohara, JO.Willis, PHYS REV B 83 (2011) |
| 7 | Surface roughness of MgO thin film and its critical thickness for optimal biaxial texturing by ion-beam-assisted deposition *S.Miyata, A.Ibi, T.Izumi, Y.Shiohara, J APPL PHYS 109 (2011) 113922-1-6 |
| 8 | Hoop Stress Test of GdBa2Cu3Oy Coated Conductor *G.Nishijima, S.Awaji, T.Izumi, K.Minegishi, Y.Shiohara, K.Watanabe, IEEE T APPL SUPERCON 21 (2011) 3094-3097 |
| 9 | Measurement of local critical currents in TFA-MOD processed coated conductors by use of scanning Hall-probe microscopy *K.Shiohara, K.Higashikawa, M.Inoue, T.Izumi, T.Kawaguchi, T.Kiss, M.Yoshizumi, PHYSICA C 471 (2011) 1041-1044 |
| 10 | Thickness dependence of I-c and J(c) of LTG-SmBCO coated-conductor on IBAD-MgO tapes *Y.Takahashi, Y.Ichino, T.Izumi, T.Kato, Y.Shiohara, Y.Takai, Y.Yoshida, M.Yoshizumi, PHYSICA C 471 (2011) 937-939 |
２０１１年論文リスト： デバイス研究開発部 (*)：First Author's |
| 1 | Fabrication of Low-Noise HTS-SQUID Gradiometers and Magnetometers With Ramp-Edge Josephson Junctions *S.Adachi, T.Hato, Y.Ishimaru, Y.Oshikubo, K.Tanabe, A.Tsukamoto, IEEE T APPL SUPERCON 21 (2011) 367-370 |
| 2 | Fabrication of integrated HTS-SQUID magnetometers having multiturn input coils with different sizes *S.Adachi, T.Hato, Y.Oshikubo, K.Tanabe, A.Tsukamoto, PHYSICA C 471 (2011) 1258-1262 |
| 3 | Non-Destructive Testing of Each Layer in GdBCO IBAD-PLD Coated Conductor by Using a High-Speed Scanning Laser Observation System *T.Hato, S.Adachi, N.Chikumoto, S.Lee, T.Machi, K.Tanabe, M.Yashizumi, IEEE T APPL SUPERCON 21 (2011) 3381-3384 |
| 4 | Non-destructive testing of multi-filamentary coated conductors by combination of a high-speed scanning laser observation system and a SQUID gradiometer array system *T.Hato, S.Adachi, T.Machi, K.Tanabe, PHYSICA C 471 (2011) 1045-1049 |
| 5 | Reduction of Radio Frequency Interference to HTS-dc-SQUID by Adding a Cooled Transformer *Y.Hatsukade, E.Arai, H.Katayama, Y.Kitamura, K.Tanabe, S.Tanaka, IEICE T ELECTRON E94C (2011) 266-272 |
| 6 | Characteristics of an HTS-SQUID gradiometer with ramp-edge Josephson junctions and its application on robot-based 3D-mobile compact SQUID NDE system *Y.Hatsukade, S.Adachi, K.Hayashi, Y.Kobayashi, Y.Shinyama, K.Tanabe, S.Tanaka, PHYSICA C 471 (2011) 1228-1233 |
| 7 | Biaxially textured cobalt-doped BaFe2As2 films with high critical current density over 1 MA/cm(2) on MgO-buffered metal-tape flexible substrates *T.Katase, H.Hiramatsu, H.Hosono, Y.Ishimaru, T.Kamiya, K.Tanabe, A.Tsukamoto APPL PHYS LETT 98 (2011) |
| 8 | Advantageous grain boundaries in iron pnictide superconductors *T.Katase, H.Hiramatsu, H.Hosono, Y.Ishimaru, T.Kamiya, K.Tanabe, A.Tsukamoto, NAT COMMUN 2 (2011) |
| 9 | Non-Destructive Evaluation of Deep-Lying Defects in Multilayer Conductors Using HTS SQUID Gradiometer *J.Kawano, S.Adachi, T.Hato, Y.Oshikubo, K.Tanabe, A.Tsukamoto, IEEE T APPL SUPERCON 21 (2011) 428-431 |
| 10 | Differential conductivity mapping of solar panels using a high-T-C superconductor SQUID *T.Kiwa, S.Adachi, N.Kataoka, S.Maeda, K.Miyake, K.Tanabe, K.Tsukada, A.Tsukamoto, PHYSICA C 471 (2011) 1238-1241 |
| 11 | High-Temperature Superconducting Gradiometer Coupled With Large Pickup Coil Made of GdBCO Coated Conductor *A.Tsukamoto, S.Adachi, K.Enpuku, T.Hato, Y.Oshikubo, K.Tanabe, IEEE T APPL SUPERCON 21 (2011) 358-362 |
| 12 | Fabrication of Integrated Two-Axis High-T-c Planar Gradiometer *A.Tsukamoto, S.Adachi, T.Hato, J.Kawano, Y.Oshikubo, K.Tanabe, IEEE T APPL SUPERCON 21 (2011) 363-366 |
| 13 | 超伝導ｴﾚｸﾄﾛﾆｸｽの進展と今後の展望 *蓮尾信也, 応用物理学会誌 80-No5 (2011) 397-402 |
| 14 | 超伝導応用の最前線 *田辺圭一, 日本物理学会誌 66-No10 (2011) 773-782 |
２０１１年論文リスト： 低温デバイス開発室 (*)：First Author's |
| 1 | Design and Implementation of Component Circuits of an SFQ Half-Precision Floating-Point Adder Using 10-kA/cm(2) Nb Process *T.Kainuma, A.Fujimaki, F.Miyaoka, S.Nagasawa, Y.Shimamura, K.Takagi, N.Takagi, Y.Yamanashi, N.Yoshikawa, IEEE T APPL SUPERCON 21(2011) 827-830 |
| 2 | Clock Line Considerations for an SFQ Large Scale Reconfigurable Data Paths Processor *I.Kataeva, H.Akaike, A.Fujimaki, S.Nagasawa, N.Takagi, N.Yoshikawa, IEEE T APPL SUPERCON 21 (2011) 809-813 |
| 3 | Design and Fabrication of Integrated Cryogenic Current Comparators *M.Maezawa, M.Hidaka, K.Hinode, NH.Kaneko, S.Kiryu, M.Maruyama, S.Nagasawa, T.Oe, T.Satoh, C.Urano, T.Yamada, IEEE T APPL SUPERCON 21(2011) 728-733 |
| 4 | Design and Demonstration of a 5-Bit Flash-Type SFQ A/D Converter Integrated With Error Correction and Interleaving Circuits *H.Suzuki, K.Fujiwara, M.Hidaka, K.Ishihara, M.Maruyama, K.Nishii, M.Oikawa, IEEE T APPL SUPERCON 21(2011) 671-676 |
| 5 | 100-GHz Single-Flux-Quantum Bit-Serial Adder Based on 10-kA/cm(2) Niobium Process *M.Tanaka, H.Akaike, A.Fujimaki, S.Nagasawa, K.Takagi, N.Takagi, Y.Yamanashi, N.Yoshikawa, IEEE T APPL SUPERCON 21(2011) 792-796 |
| 6 | Thickness and hole-shape dependence of flux penetration into square superconducting networks *Y.Tsuchiya, M.Hidaka, S.Nagasawa, Y.Nakajiama, T.Tamegai, PHYSICA C 471 (2011) 808-811 |
２０１１年論文リスト： 電力機器研究開発部 (*)：First Author's |
| 1 | Effects of Lateral-Tailoring of Coated Conductor for Ac Loss Reduction of Superconducting Power Transmission Cables *N.Amemiya, Q.Li, K.Takeuchi, T.Nakamura, M.Yagi, S.Mukoyama, Y.Aoki, N.Fujiwara, IEEE T APPL SUPERCON 21 (2011) 943-946 |
| 2 | Ac loss reduction of multilayer superconducting power transmission cables by using narrow coated conductors *N.Amemiya, Q.Li, K.Ito K.Takeuchi, T.Nakamura, T.Okuma, SUPERCOND SCI TECH 24 (2011) |
| 3 | Over-Current Characteristics of 275-kV Class YBCO Power Cable *A.Ishiyama, XD.Wang, H.Ueda, T.Uryu, M.Yagi, N.Fujiwara, IEEE T APPL SUPERCON 21 (2011) 1017-1020 |
| 4 | Degradation of YBCO Coated Conductors Due to an Over-Current Pulse *A.Ishiyama, M.Arai, H.Momotari, XD.Wang, H.Ueda, T.Saito, Y.Aoki, M.Yagi, T.Machi, N.Fujiwara, IEEE T APPL SUPERCON 21 (2011) 3025-3028 |
| 5 | Current Margin Against the Fault Current in REBCO Coated Conductors *A.Ishiyama, H.Momotari, XD.Wang, M.Arai, H.Ueda, , M.Ohya, K.Ohmatsu, N.Fujiwara, IEEE T APPL SUPERCON 21 (2011) 3033-3036 |
| 6 | Effects of Unevenly Distributed Critical Currents and Damaged Coated Conductors to AC Losses of Superconducting Power Transmission Cables *Q.Li, N.Amemiya, K.Takeuchi, T.Nakamura, N.Fujiwara, IEEE T APPL SUPERCON 21 (2011) 953-956 |
| 7 | Model Cable Tests for a 275 kV 3 kA HTS Power Cable *S.Mukoyama, M.Yagi, T.Yonemura, T.Nomura, N.Fujiwara, Y.Ichikawa, Y.Aoki, T.Saitoh, N.Amemiya, A.Ishiyama, N.Hayakawa, IEEE T APPL SUPERCON 21 (2011) 976-979 |
| 8 | Thermal Conductivity of YBCO Coated Conductors Reinforced by Metal Tape *T.Naito, H.Fujishiro, Y.Yamamura, K.Saito, H.Okamoto, H.Hayash, Fujiwara, Y.Gosho, Y.Shiohara, IEEE T APPL SUPERCON 21 (2011) 3037-3040 |
| 9 | Design and Evaluation of 66 kV Class HTS Power Cable Using REBCO Wires *M.Ohya, T.Setoguchi, H.Yumura, T.Masuda, N.Amemiya, O.Maruyama,T.Ohkuma, IEEE T APPL SUPERCON 21 (2011) 1009-1012 |
| 10 | Design and evaluation of 66 kV-class HTS power cable using REBCO wires *M.Ohya, H.Yumura, T.Masuda, N.Amemiya, A.Ishiyama, T.Ohkuma, PHYSICA C 471 (2011) 1279-1282 |
| 11 | Model for electromagnetic field analysis of superconducting power transmission cable comprising spiraled coated conductors *K.Takeuchi, N.Amemiya, T.Nakamura, O.Maruyama,T.Ohkuma, SUPERCOND SCI TECH 24 (2011) |
| 12 | Over-Current Characteristics of 66-kV RE123 HTS Power Cable *XD.Wang, A.Ishiyama, M.Ohya, N.Fujiwara, IEEE T APPL SUPERCON 21 (2011) 1013-1016 |
| 13 | Progress of 275 kV-3 kA YBCO HTS cable *M.Yagi, S.Mukoyama, N.Amemiya, A.Ishiyama, X.Wang,Y.Aoki, T.Saito, T.Ohkuma, O.Maruyama, PHYSICA C 471 (2011) 1274-1278 |
| 14 | RE123系線材の曲げひずみ特性 *山田 雄一, 山田 穣, 大熊 武, 低温工学 46-No5 (2011) 246-253 |
| 15 | Lateral critical current density distributions degraded near edges of coated conductors through cutting processes and their influence on ac loss characteristics of power transmission cables N.Amemiya, Q.Li, R.Nishino, K.Takeuchi, T.Nakamura, K.Ohmatsu, M.Ohya, O.Maruyama, T.Okuma, T.Izumi, PHYSICA C 471 (2011) 990-994 |
| 16 | Development of a REBCO Superconducting Transformer With Current Limiting Function *M.Iwakuma, A.Tomioka, T.Otonari, T.Ogata, T.Tsutsumi, S.Sato, H.Hayashi, H.Okamoto, Y.Iijima, T.Saitoh, Y.Aoki, T.Koizumi, T.Hasegawa, T.Ohkuma, Y.Gosho, Y.Yamada, T.Izumi, Y.Shiohara, IEEE T APPL SUPERCON 21 (2011) 1405-1408 |
| 17 | Mechanical and transport characteristic exploration for coated conductors by hoop stress tests *G.Nishijima, S.Awaji, N.Hirano, A.Ibi, T.Izumi, S.Nagaya, K.Shikimachi, Y.Shiohara, K.Watanabe, PHYSICA C 471 (2011) 1062-1066 |
| 18 | Over-current characteristics of model coil using Y-based multi-filament wire for superconducting power transformers *H.Okamoto, H.Hayashi, M.Iwakuma, A.Tomioka, T.Saito, Y.Gosho, K.Tanabe, Y.Shiohara, PHYSICA C 471 (2011) 1379-1380 |
| 19 | AC over-current test results of YBCO conductor for YBCO power transformer with fault current limiting function *A.Tomioka, T.Otonari, T.Ogata, M.Iwakuma, H.Okamoto, H.Hayashi, Y.Iijima, T.Saito, Y.Gosho, K.Tanabe, T.Izumi, Y.Shiohara, PHYSICA C 471 (2011) 1367-1373 |
| 20 | The short-circuit test results of 6.9 kV/2.3 kV 400 kVA-class YBCO model transformer *A.Tomioka, T.Otonari, T.Ogata, M.Iwakuma, H.Okamoto, H.Hayashi, Y.Iijima, T.Saito, Y.Gosho, K.Tanabe, T.Izumi, Y.Shiohara, PHYSICA C 471 (2011) 1374-1378 |
