| ２００６年論文リスト： 材料物性研究部 |
| 1 | Non-destructive characterization of long coated conductors using a Hall sensor array; K. Nakao, T. Machi, S. Miyata, T. Muroga, A. Ibi, T. Watanabe, M. Konishi, Y. Yamada, Y. Kitoh, H. Fuji, Y. Aoki, T. Izumi, and Y. Shiohara, Physica C 445-448 (2006) 669-672. |
| 2 |
Development of magneto-optical imaging equipment for long length 2G-HTS tapes; T. Machi, N. Chikumoto, K. Nakao, Y. Aoki, Y. Kitoh, H. Fuji, T. Izumi, A. Ibi, and Y. Yamada, Physica C 445-448 (2006) 673-676. |
| 3 |
Impurity effect on optical response in MgB2; T. Kakeshita, S. Lee, and S. Tajima, Physica C 445-448 (2006) 50-53. |
| 4 |
Anisotropic Drude response and the effect of anisotropic C substitution in Mg(B1-xCx)2; T. Kakeshita, S. Lee, and S. Tajima, Physical Review Letters 97 (2006) 037002-1-4. |
| 5 |
Diffusion joint of YBCO coated conductors using stabilizing silver layers; J.Y. Kato, N. Sakai, S. Tajima, S. Miyata, M. Konishi, Y. Yamada, N. Chikumoto, K. Nakao, T. Izumi, and Y. Shiohara, Physica C 445-448 (2006) 686-688. |
| 6 |
YBCO超電導線材の銀安定化層を用いた拡散接合; 加藤順子、坂井直道、田島節子、筑本知子、宮田成紀、小西昌也、中尾公一、和泉輝郎、塩原 融、Forum of Superconductivity Science and Technology News (FSST NEWS) 110 (2006) 1-4. |
| ２００６年論文リスト： バルク研究開発室 |
| 1 | Effect of RE2BaCuO5 refinement on the critical current density and trapped field of melt-textured (Gd, Y)-Ba-Cu-O bulk superconductors; S. Nariki, N. Sakai, M. Murakami, and I. Hirabayashi, Physica C 439 (2006) 62-66.
|
| 2 |
Fabrication and superconducting properties of Gd-Ba-Cu-O single-grain bulk with barium cerate addition; S. Nariki, N. Sakai, M. Murakami, and I. Hirabayashi, Physica C 445-448 (2006) 291-294.
|
| 3 |
Effect of potassium addition on YBa2Cu3Ox superconductors; K. Inoue, N. Sakai. M. Murakami, and I. Hirabayashi, Physica C 445-448 (2006) 128-132.
|
| 4 |
Effect of metal impregnation in the field cool magnetization of bulk superconductor; M. Kita, S. Nariki, N. Sakai, and I. Hirabayashi, Physica C 445-448 (2006) 375-378.
|
| 5 |
Characteristics of metal impregnated bulk Gd-Ba-Cu-O superconductors cooled down in a magnetic field; M. Kita, S. Nariki, N. Sakai, and I. Hirabayashi, Superconductor Science and Technology 19 (2006) S491-S493.
|
| 6 |
Advances in enlargement of melt-textured Gd-Ba-Cu-O bulk superconductors; S. Nariki, N. Sakai, M. Kita, M. Fujikura, M. Murakami, and I. Hirabayashi, Superconductor Science and Technology 19 (2006) S500-S505.
|
| 7 |
R & D of superconducting bearing technologies for flywheel energy storage
systems; N. Koshizuka, Physica C 445-448 (2006) 1103-1108. |
| 8 |
電力貯蔵用超電導フライホイール; 腰塚直己、日本応用磁気学会誌「まぐね」1 (2006) 301-307. |
| 9 |
USERSを利用した高温超電導バルクの製造実験; 平田泰昌、坂井直道、平林 泉、村上雅人、田中昭二、日本マイクログラビティ応用学会誌23 (2006) 210-215. |
| 10 |
RE-Ba2Cu3Oy formation mechanism via (RE) 2BaO4; M. Muralidhar, N. Sakai, M. Murakami, I. Hirabayashi, and S. Tanaka, Physica C 445 (2006) 282-285. |
| 11 |
Superior growth orientation control via ZnO doping of large-grain LRE-Ba2Cu3Oy compounds grown with MgO seeds; M. Muralidhar, T. Kono, M. Jirsa, N. Sakai, M. Murakami, and I. Hirabayashi, Superconductor Science and Technology 19 (2006) S550-S555. |
| 12 |
Flux pinning and superconducting properties of ZnO added (Nd,Eu,Gd)Ba2Cu3Oy; M. Muralidhar, N. Sakai, M. Jirsa, T. Kono, M. Murakami, and I. Hirabayashi, Physica C 445 (2006) 403-407.
|
| 13 |
ZnO doping effects in melt-textured (Nd0.33Eu0.39Gd0.27) Ba2Cu3Oy grown from MgO seed; M. Muralidhar, T. Kono, M. Jirsa, N. Sakai, M. Murakami, and I. Hirabayashi, Superconductor Science and Technology 19 (2006) L25-L28. |
| 14 |
Field trapping property of Gd-Ba-Cu-O bulk superconductor 140 mm in diameter; N. Sakai, M. Kita, S. Nariki, M. Muralidhar, K. Inoue, I. Hirabayashi, and M. Murakami, Physica C 445 (2006) 339-342. |
| 15 |
Levitation at 90.2K and its applications; M. Muralidhar, N. Sakai, M. Jirsa, M. Murakami, and I. Hirabayashi, Studies of High Temperature Superconductors 50 (2006) 229-251. |
| ２００６年論文リスト： 線材研究開発部 |
| 1 | Key factors for scale-up of YBCO coated conductors by the advanced TFA-MOD process; Y. Aoki, R. Teranishi, K. Nakaoka, S. Nomoto, Y. Kito, J. Matsuda, T. Izumi, Y. Shiohara, H. Fuji, S. Miyata, Y. Yamada, T. Goto, and A Yajima, Physica C 445 (2006) 540-544. |
| 2 | R&D for long tapes with high Ic by advanced TFA-MOD process; T. Izumi,
H. Fuji, Y. Aoki, R. Teranishi, J. Matsuda, K. Nakaoka, Y. Kitoh, S. Nomoto,
Y. Yamada, A Yajima, T. Saitoh, and Y. Shiohara, Physica C 445 (2006) 533-539. |
| 3 | Fabrication of Y1-xRExBa2Cu3Oy films on single crystalline substrates and IBAD buffered metallic tapes by advanced TFA-MOD process; Y. Kitoh, J. Matsuda, K. Suzuki, R. Teranishi, K. Nakaoka, Y. Aoki, H. Fuji, A. Yajima, Y. Yamada, T. Izumi, and Y. Shiohara, Physica C 445 (2006) 558-562. |
| 4 | Jc-B characteristics of RE-Ba-Cu-O (RE = Sm, Er and [Gd, Er]) films on PLD-CeO2/IBAD-GZO/metal substrates; M. Konishi, K. Takahashi, A. Ibi, T. Muroga, S. Miyata, H. Kobayashi, Y. Yamada, and Y. Shiohara, Physica C 445 (2006) 633-636. |
| 5 | Development of wide area reaction system for Reel-to-Reel TFA-MOD process; S. Nomoto, Y. Aoki, R. Teranishi, A. Sato, T. Izumi, and Y. Shiohara, Physica C 445 (2006) 549-552. |
| 6 | Highlights in R&D for coated conductors in Japan; Y. Shiohara, Y. Kito,
and T. Izumi, Physica C 445 (2006) 496-503. |
| 7 | Production rate of crystallization process in TFA-MOD method for YBCO coated conductors; R. Teranishi, S. Nomoto, J. Matsuda, Y. Aoki, K. Nakaoka, H. Fuji, Y. Kitoh, T. Izumi, Y. Shiohara, Y. Yamada, and A. Yajima, Physica C 445 (2006) 553-557. |
| 8 | Microstructure and crystallization mechanism of YBa2Cu3O7-y films formed by advanced TFA-MOD process; J. Matsuda, K. Nakaoka, R. Teranishi, Y. Kitoh, Y. Aoki, H. Fuji, Y. Yamada, T. Izumi, and Y. Shiohara, Physica C 445 (2006) 563-569. |
| ２００６年論文リスト： 名古屋高温超電導線材開発センター |
| 1 | Efforts for high throughput of IBAD-GZO-based substrate process for YBCO coated conductors; S. Miyata, A. Ibi, R. Kuriki, M. Konishi, Y. Yamada, Y. Shiohara, and T. Hirayama, Physica C 445-448 (2006) 611-613. |
| 2 | owards the practical PLD-IBAD coated conductor fabrication－Long wire, high production rate and Jc enhancement in a magnetic field; Y. Yamada, A. Ibi, H. Fukushima, R. Kuriki, S. Miyata, K. Takahashi, H. Kobayashi, S. Ishida, M. Konishi, T. Kato, T. Hirayama, and Y. Shiohara; Physica C 445-448 (2006) 504-508. |
| 3 | Development of long YBCO coated conductors by IBAD-PLD method; A. Ibi, H. Fukushima, R. Kuriki, S. Miyata, K. Takahashi, H. Kobayashi, M. Konishi, T. Watanabe, Y. Yamada, and Y. Shiohara, Physica C 445-448 (2006) 525-528. |
| 4 | Progress of YBCO coated conductor in Japan and recent advance of PLD and IBAD method; Y. Yamada, T. Izumi, and Y. Shiohara, Advances in Science and Technology 47 (2006) 124-130. |
| 5 | Investigation of thick PLD-GdBCO and ZrO2 doped GdBCO coated conductors with high critical current on PLD-CeO2 capped IBAD-GZO substrate tapes; K. Takahashi, H. Kobayashi, Y. Yamada, A. Ibi, H. Fukushima, M. Konishi, S. Miyata, Y. Shiohara, T. Kato, and T. Hirayama, Superconductor Science and Technology 19 (2006) 924-929. |
| 6 | 磁界下での臨界電流向上－ナノ組織によるマクロな特性改善－; 山田 穣、松本 要、電気学会誌 126 (2006) 280-282. |
| 7 | Development of long GdBCO coated conductor using the IBAD/MPMT-PLD method; A. Ibi, and H. Fukushima, Y. Yamada, S. Miyata, R. Kuriki, K. Takahashi, and Y. Shiohara, Superconductor Science and Technology 19 (2006) 1229-1232. |
| 8 | Thickness dependence of critical current density in IBAD/PLD YBCO coated conductor; T. Matsushita, M. Kikuchi, K. Kimura, S. Miyata, A. Ibi, T. Muroga, Y. Yamada, and Y. Shiohara, Proceedings of the 6th Pacific Rim Conference on Ceramic and Glass Technology (2006). |
| ２００６年論文リスト： デバイス研究開発部 |
| 1 | Fabrication of high-temperature superconductor single-flux-quantum circuits using a multilayer structure with a smooth surface; H. Wakana, S. Adachi, K. Tsubone, Y. Tarutani, A. Kamitani , K. Nakayama, Y. Ishimaru, and K. Tanabe, Superconductor Science and Technology 19 (2006) S312-S315. |
| 2 | Investigation of flux state in SFQ circuits with moats by scanning SQUID microscope; K. Suzuki, H. Kawamura, M. Maruyama, T. Hato, H. Suzuki, S. Yorozu, Y. Kameda, Y. Ishimaru, K. Nakayama, H. Wakana, S. Adachi, Y. Tarutani, and K. Tanabe, Superconductor Science and Technology 19 (2006) S316-S319. |
| 3 | Surface protection of oxide circuit by polyimide thin film; Y. Oshikubo, Y. Tarutani, H. Wakana, S. Adachi, Y. Ishimaru, K. Nakayama, T. Hato, O. Horibe, and K. Tanabe, Physica C 445-448 (2006) 900-903 |
| 4 | Toggle-flip-flop operation of oxide SFQ circuit; K. Tsubone, Y. Tarutani, H. Wakana, Y. Ishimaru, S. Adachi, K. Nakayama, Y. Oshikubo, O. Horibe, Y. Morimoto, and K. Tanabe, Physica C 445-448 (2006) 1046-1049. |
| 5 | IcRn product of YBa2Cu3O7-x ramp-edge junctions at temperatures higher than 30 K; Y. Morimoto, Y. Tarutani, H. Wakana, S. Adachi, K. Tsubone, Y. Ishimaru, K. Nakayama, Y. Oshikubo, O. Horibe, N. Iwata H. Yamamoto, and K. Tanabe, Physica C 445-448 (2006) 904-907. |
| 6 | nvestigation of magnetic flux state in Nb SFQ circuits by scanning SQUID microscope; K. Suzuki, S. Yorozu, Y. Kameda, and K. Tanabe, Physica C 445-448 (2006) 1034-1036. |
| 7 | Utilization of process TEG for fabrication of HTS circuits; T. Hato, Y. Okada, M. Maruyama, H. Suzuki, H. Wakana, S. Adachi, U. Kawabe, and K. Tanabe, Physica C 445-448 (2006) 912-916. |
| 8 | Development of multilayer process with upper wiring layer for HTS circuit application; Y. Ishimaru, M. Ogura, O. Horibe, S. Adachi , H. Wakana, K. Nakayama, Y. Tarutani, U. Kawabe, and K. Tanabe, Physica C 445-448 (2006) 908-911. |
| 9 | Fabrication of ramp-edge Josephson junction by PLD method using double plume; K. Higuchi, K. Igarashi, H. Wakana, K. Nakayama, S. Adachi, N. Iwata, H. Yamamoto, and K. Tanabe, Physica C 445-448 (2006) 917-920. |
| 10 | Evaluation of superconducting first-order sigma-delta modulator; A. Yoshida, H. Suzuki, S. Hasuo, K. Tanabe, T. Himi, H. Takai, F. Furuta, K. Saitoh, Physica C 445-448 (2006) 1037-1040. |
| 11 | Influence of initial counter-layer deposition condition using double-plume PLD method on characteristics of interface-modified Josephson junctions; K. Nakayama, S. Higuchi, H. Wakana, S. Adachi, Y. Tarutani , and K. Tanabe, Physica C 445-448 (2006) 925-929. |
| 12 | Stable preparation process of superconductor-insulator multilayer films for HTS devices by off-axis magnetron sputtering; S. Adachi, H. Wakana, A. Kamitani, and K. Tanabe, Physica C 445-448 （2006) 895-899. |
| 13 | 高温超伝導デバイス技術の進展と展望; 田辺圭一、応用物理 75 (2006) 33-40. |
| ２００６年論文リスト： 低温デバイス開発室 |
| 1 | Automatic single-flux-quantum (SFQ) logic synthesis for top-down circuit design; Y. Kameda, S. Yorozu, and Y. Hashimoto, Journal of Physics: Conference Series 43 (2006) 1179-1182. |
| 2 | Sub-Kelvin single flux quantum control circuits and multi-chip packaging for supporting superconducting qubits; S. Yorozu, T. Miyazaki, V. Semenov, Y. Nakamura, Y. Hashimoto, K. Hinode, T. Sato, Y. Kameda, and J.S. Tsai, Journal of Physics: Conference Series 43 (2006) 1417-1420. |
| 3 | Method for detailed evaluation of yield of Nb Josephson junctions; K. Hinode, Y. Hashimoto, Y. Kameda, T. Satoh, S. Yorozu, S. Nagasawa, and M. Hidaka, Physica C 445-448 (2006) 941-945. |
| 4 | 40-GHz operation of a single-flux-quantum (SFQ) 4×4 switch scheduler; Y. Kameda, S. Yorozu, Y. Hashimoto, H. Terai, A. Fujimaki, and N. Yoshikawa, Physica C 445-448 (2006) 1008-1013. |
| 5 | Characteristics of Nb/AlOx/Nb junctions fabricated in planarized multi-layer Nb SFQ circuits; T. Satoh, K. Hinode, H. Akaike, S. Nagasawa, Y. Kitagawa, and M. Hidaka, Physica C 445-448 (2006) 937-940. |
| 6 | Current status and future prospect of the Nb-based fabrication process for single flux quantum circuits; M. Hidaka, S. Nagasawa, T. Satoh, K. Hinode, and Y. Kitagawa, Superconductor Science and Technology 19 (2006) S138-S142. |
| 7 | Inductances of striplines and stacked vias in planarized multi-layer Nb circuits; H. Akaike, K. Hinode, S. Nagasawa, Y. Kitagawa, and M. Hidaka, Physica C 445 (2006) 946-950. |
| 8 | Demonstration of a 120 GHz single-flux-quantum shift register circuit based on a 10 kA cm-2 Nb process; H. Akaike, T. Yamada, A. Fujimaki, S. Nagasawa, K. Hinode, T. Sato, Y. Kitagawa, and M. Hidaka, Superconductor Science and Technology 19 (2006) S320-S324. |
| 9 | Design of all-dc-powered high-speed single flux quantum random access memory based on a pipeline structure for memory cell arrays; S. Nagasawa, K. Hinode, T. Satoh, Y. Kitagawa, and M. Hidaka, Superconductor Science and Technology 19 (2006) S325-S330. |
| ２００６年論文リスト： 盛岡超電導技術応用研究所 |
| 1 | Liquid phase epitaxial growth of (Bi, Lu)3 (Fe, Ga)5O12 films with in-plane anisotropy for magneto-optical imaging; K. Iida, N. Kawamae, S. Hoshi, T. Machi, T. Kono, J.Y. Kato, N. Chikumoto, N. Koshizuka, N. Adachi, and T. Okuda, Japanese Journal of Applied Physics 44, No.4A (2005) 1734-1739. |
| 2 | Evaluation of magnetic homogeneities of Gd-Ba-Cu-O bulk superconductors by different Hall probe scanning methods; T. Kono, H. Fukai, N. Sakai, S. Nariki, I. Hirabayashi, M. Murakami, and N. Koshizuka, Physica C 426-431 (2005) 632-638. |
| 3 | Graphite coating effects on the critical current characteristics of MgB2/Cu wires fabricated by an in situ PIT method; S. Shimura, T. Machi, K. Nakao, N. Koshizuka, S. Tanaka, K. Mochizuki, N. Shibata, and K. Ushio, Physica C 426-431 (2005) 1254-1260. |
| 4 | In-situ PIT法によるCuおよびCu合金シースMgB2線材の作製; 志村聡、町敬人、中尾公一、腰塚直己、望月一成、柴田昇、牛尾一博, 低温工学 40, No.11 (2005) 498-504. |
| 5 | Spatial inhomogeneities of Gd-Ba-Cu-O bulk superconductors evaluated by different Hall probe scanning methods; T. Kono, N. Sakai, S. Nariki, I. Hirabayashi, M. Murakami, and N. Koshizuka, IEEE Transactions on Applied Superconductivity 15, No.2 (2005) 3640-3643. |
| 6 | Analysis of mixed ternary LREBa2Cu3Oy nano-structures by STM and TEM; Y M. Muralidhar, N. Sakai, M. Jirsa, M. Murakami, N. Koshizuka, and I. Hirabayashi, Physica C 426-431 (2005) 196-201. |
| 7 | Development of technology for a reliable fabrication of LRE-123 materials for levitation applications above 80 K; M. Muralidhar, N. Sakai, M. Jirsa, M. Murakami, N. Koshizuka, and I. Hirabayashi, Physica C 426-431 (2005) 777-782. |
| 8 | Nanoscale Gd2BaCuO5 particles in (Sm0.33Eu0.33Gd0.33)Ba2Cu3Oy and magnetic levitation at 90.2 K; Y M. Muralidhar, N. Sakai, M. Jirsa, M. Murakami, and N. Koshizuka, Superconductor Science and Technology 18 (2005) L9-L12. |
| 9 | Superconducting levitation at 90 K － a base for construction of non-contact liquid oxygen pumps; M. Muralidhar, N. Sakai, M. Jirsa, M. Murakami, and N. Koshizuka, Superconductor Science and Technology 18 (2005) S47-S51. |
| 10 | バルク超電導体の磁気的均質性評価技術の研究; 河野猛、坂井直道、成木紳也、平林泉、村上雅人、腰塚直己, 低温工学（特集号） 40, No.8 (2005) 1-2. |
